Monarch F6 Water Station
A six-tap floor-standing stainless station for UAE accommodation, factories and events: a 500 W chilled-only version at 300 litres an hour, or a 2.5 kW version adding hot water at 93–100 °C.
What it does.
- Chilled-only: 300 L/h at 5-10 °C from a 200 L cold tank
- Chilled & hot (2.5 kW): 80 L/h chilled plus 90 L/h hot at 93-100 °C
- Six knob faucets on one stainless station
- Hermetic Danfu compressor on R134a
- SS304 water tank with SS201 cabinet
- Same 1200 × 650 × 1300 mm cabinet for both versions
Typical applications
Monarch F6 Water Station in the UAE
Labour accommodation, warehouses and event sites in the UAE need plenty of chilled water from a station that takes hard use. The chilled-only F6 holds 200 L cold and pours 300 litres an hour from six knob taps.
Where tea and food prep need hot water, the 2.5 kW version gives 80 L/h chilled and 90 L/h hot at 93–100 °C, in the same 1200 × 650 × 1300 mm cabinet.
Common questions
Chilled-only or chilled and hot?
Chilled-only gives the most cold water, 300 L/h. Chilled and hot trades some of that for 90 L/h of hot water, with 80 L/h chilled.
What is it made of?
An SS304 water tank inside an SS201 stainless cabinet, with a hermetic compressor on R134a.
Who is it sized for?
180 to 200 people a day, from six knob faucets on one station.
Supplied, fitted and serviced in the UAE
UAE mains water is desalinated and fairly soft: DEWA reports a typical hardness of 60.7 mg/l in Dubai. Most problems start in building tanks and pipework, so filtration and UV usually matter more here than softening.
Tell us whether the building runs on mains, tanker or well water, and what the system is for. We specify it, quote in dirhams and fit it.
Source: DEWA Sustainability Report 2025, p.58.
Interested in the Monarch F6 Water Station?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown
