Regent Sediment 3072
A plant-room sediment filter for UAE hotels, estates and industrial feeds: a 697-litre vessel holding 367.9 litres of Filter-AG, AG PLUS or Birm, 11.8 m³ an hour and no cartridges to change.
What it does.
- 11.8 m³/h service flow, 15.9 m³/h backwash
- 367.9 L of media: Filter-AG, Filter-AG PLUS or Birm
- Metered CE 1.5″ valve: backwash by measured volume, not a clock
- Self-cleaning bed: no cartridges or bags to change
- 230 V, 30 W
- Dry weight 95 kg
Typical applications
Regent Sediment 3072 in the UAE
Large UAE buildings store water in tanks that collect sediment over time. Rather than change cartridges constantly, the 3072 traps it in a media bed and backwashes it to drain.
Birm media adds iron and manganese removal for sites on well water. A metered CE 1.5-inch valve sets the backwash by volume.
Common questions
How does it clean itself?
It backwashes at 15.9 m³ an hour, flushing trapped sediment to drain.
Does it need cartridges?
No. The media bed does the filtering and is cleaned by backwash.
Which media suits well water?
Birm, for iron and manganese. Filter-AG or AG PLUS for general sediment.
Supplied, fitted and serviced in the UAE
UAE mains water is desalinated and fairly soft: DEWA reports a typical hardness of 60.7 mg/l in Dubai. Most problems start in building tanks and pipework, so filtration and UV usually matter more here than softening.
Tell us whether the building runs on mains, tanker or well water, and what the system is for. We specify it, quote in dirhams and fit it.
Source: DEWA Sustainability Report 2025, p.58.
Interested in the Regent Sediment 3072?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown
